Start Bike Without Key: If the key of the bike is lost, then how to start, understand this method, it will be useful in trouble

[ad_1]

highlights

Losing the key of the bike can land you in trouble.
In such a situation, the only way left is to push the bike.
Learn here how to start the bike without the key.

Start Bike Without Key: The company gives the bike with a lock so that it does not get stolen. But many times the key is lost by mistake or the key does not work due to fault in the lock. In such a situation only a bike mechanic can help you. But if the mechanic is not around then your problem gets worse. To deal with this problem, today we are going to tell you how to start the bike if the key is lost.

Let us tell you that the ignition system of the bike works to turn on the current supply. If the key of the bike is not there then you will not be able to turn on the ignition. But as soon as the key is pressed, current starts reaching the bike’s engine and the bike starts on self or kick start. Let us tell you that this trick can be used only with old bikes, because new BS-6 bikes and scooters are now coming with engine immobilizer. Because of this it is difficult to start them without the key.

Also read: This car of Maruti ate Alto K10, the budget car bowed down in front of features and power, sales falling every month

Bike will start like this without key

—For this, you have to first stand the bike in the main stand, after that find the ignition wire coming out of the handle bar of the bike. This wire is connected to the engine running from under the instrument cluster.

—Under the instrument cluster, you will see some wires tied in a bundle. You have to see which bundle has a cap like locking system. It is also called male-female socket which can be attached/detached.

After this, you have to remove the mail cap coming from the side of the handle. As soon as you remove the cap, you will see two-three small holes in the female cap at the other end.

Also read: Car Driving: Cars have been driving for years, but people do not know the right way to sit, this reality is eye-opening

After this you have to take a small piece of wire. Both the ends of this wire have to be inserted in the two different holes visible in the cap. After doing this, by lighting the bike’s light and indicator, check whether the wire connection is done properly or not. If the indicator and neutral light of the bike are on, then understand that the connection is correct.

—If the connection is not correct then the bike light will not light up. When this happens, you can also try putting pieces of wire in different holes.

—To turn off the bike, you have to remove the wire or you can also turn off the bike by putting it in gear.

WARNING: This article described is for emergency use only. Do not use this information for any wrong purpose.

Tags: Auto News, bikes, bike news, Bike News

[ad_2]

Leave a Comment